StaticSmart Conductive Flooring Adhesive Products

Conductive adhesive, an integral component in your new static control esd floor, provides a path to ground, to safely and effectively discharge static. The conductive adhesive takes the place of the old copper grounding grids beneath the floor.

How the Adhesive Works
Conductive adhesive provides electrical continuity by creating an electrical bond between ESD flooring tiles. So when a person walks across the floor or slides out of a chair, the built up static is discharged to the static control floor. The static charge follows a path from the conductive yarn fibers, through the conductive floor backing material to the adhesive and is effectively discharged to ground.StaticSmart Conductive Adhesives are highly conductive and provide excellent continuity across the entire ESD floor. To meet relevant specifications, the conductive adhesive must be attached with copper strips to some form of ground—e.g. Electrical conduit, building steel or a dedicated grounding strip.

Available Adhesive Products for Static Control Floors:

NEW! LokDots™ Dry Adhesive system for StaticSmart Carpet Tile -
An innovative new pressure sensitive adhesive product designed for use exclusively with EcoWorx® backed carpet tile, including StaticSmart carpet tile. No other dry adhesive works as efficiently or as easily. Reduces waste, saves time and lowers cost on installations. A better alternative to using wet adhesive, it features an intuitive, easy to use lightweight applicator. Can be applied in demanding installation environments such as high moisture areas (up to 10 lbs., 95% humidity) or high alkalinity (12pH), occupied spaces, and can be installed on all subfloors.

Call 978.276.0820 for ordering info
LokDots Adhesive System for Carpet Tile | LokDots Info sheet

Shaw CompuRelease - A patented, clear releasable conductive adhesive created exclusively for installing StaticSmart carpet tile. CompuRelease is manufactured with our FibreLink technology to create a complete electrical ground plane — providing total continuity across the ESD floor. Far superior to expensive conductive "dry adhesive" tapes, messy black adhesives and complex grounding grids, Shaw CompuRelease is easy to install, can be walked on immediately and provides unequalled conductive performance. When installed under modular carpet,CompuRelease provides an excellent bond and offers the flexibility of a release adhesive. With Shaw CompuRelease, tiles are easily lifted and removed for repair, replacement or reuse, without the need for specialized skills or tools. And, being a CLEAR adhesive, there's no fear of accidentally tracking messy black adhesives over newly installed carpet!

• Excellent conductivity
• Clear adhesive with FibreLink technology
• Easy cleanup
• Easy to Install
• No special skill or tools required
• Releases for easy removal or replacement
• Well-suited for use with modular tiles
  

Shaw CompuRelease Part Numbers: 1848 (1 gallon), 2087 (4 gallon)
Info Sheet | Material Safety Data Sheet

• Excellent conductivity
• Clear adhesive with FibreLink technology
• Easy cleanup
• Exceptional side-to-side stability
• No odor, no VOC's
• Permanent bond
• Ideal for rugged applications

Shaw 5100SD Static Dissipative Flooring Adhesive Part Numbers: 6078 (1 gallon), 6079 (4 gallon)
Installation Guidelines | Material Safety Data Sheet

STATICSMART CONDUCTIVE ADHESIVE PART NUMBERS

When ordering StaticSmart conductive adhesive, please refer to the following part numbers:

Order by Phone: 1.978.276.0820